Add to favorites
?>" class="main_submit_orange">


I.  Circulation cleaning  
1. Alkaline cleaning

- liquid cleaning concentrate,
  alkaline, can be used regardless of the hardness of water
used for removing protein and fat impurities in CIP systems.
working solution concentration:
0.5-1.5% for removing standard fat and protein impurities
DOS - 1 - liquid additive to caustic soda improves cleaning properties of lye, prevents formation of scale deposits,
working solution concentration: 0.1%
2. Low alkaline disinfection  
a/ATOS  D low-foaming - liquid disinfecting concentrate, low alkaline, non-chlorine, based on tertiary amine working solution concentration:
0.25%, temp. 10- 40°C
3. Alkaline cleaning and disinfecting
a/ ATOS non-foaming S liquid cleaning and disinfecting concentrate,
alkaline, chlorine
used for cleaning tanks, pipes and tubes
working solution concentration 0.5-1.5%
b/ DEZO 1 non-foaming liquid cleaning and disinfecting concentrate
alkaline, chlorine
used for cleaning from fat and protein butter making machines, cheese moulds and closed CIP systems, working solution concentration 0.5 – 1.5%
4. Acid oxygen disinfection
IXONOS 15 acid disinfectant based on peracetic acid and hydrogen peroxide solution working solution concentration:
0.07 – 0.25%
5. Acid cleaning
a/ LAKTOS liquid acid concentrate used for removing standard milk deposits,
working solution concentration 2-2.5%
b/ LAKTOS SW liquid acid concentrate safer for humans than Laktos,
working solution concentration: 1.5-2%
c/ LAKTOS 10 liquid acid concentrate removes thick layers of deposit stuck to the system surface
working solution concentration: 0.5-2%
 d/ LAKTOS  BF liquid acid concentrate without phosphates,
working solution concentration 1-2%
  e/ BICID liquid acid concentrate single-phase acid cleaning of fats and deposits, working solution concentration 1- 3%
6. Acid cleaning and disinfecting
DISEPTOL low-foaming liquid acid cleaning and disinfecting concentrate single-phase acid cleaning of fats, deposits and disinfection, working solution concentration 0.5-2%
“two in one” system

 + IXONOS 15

liquid acid concentrate for the removal of scale deposits
acid disinfectant
with oxygen as the active factor
removes scale and deposit, disinfects
working solution concentration:
a/ LAKTOS 10  0.5 -2%
depending on the degree of impurity
+  IXONOS 15  -  0.1%
II. Foam cleaning and disinfecting
1.  Alkaline
DEZO 1 foaming liquid cleaning and disinfecting concentrate
alkaline, chlorine
foam removal of fat and protein from walls and floors with simultaneous active chlorine disinfection,
working solution concentration 2-5%
2. Acid
DISEPTOL liquid cleaning and disinfecting concentrate, non-chlorine foam cleaning of floors, walls and devices from rust deposit and scale  (disinfecting factor – cation compounds),
working solution concentration 2 - 5%
III.  Spray  cleaning  
COMP N low-foaming liquid concentrate, neutral cleaning containers and cases in tunnel spray washers,
working solution concentration 1-1.5%
DEZO 1 non-foaming liquid cleaning and disinfecting concentrate, chlorine cleaning and disinfecting containers and cases, working solution concentration 0.5-1%
IV. Manual or immersion cleaning
1. Cleaning and disinfecting agents
a/ ATOS foaming liquid concentrate based on active chlorine working solution concentration 2-2.5%
b/ ATOS foaming S liquid concentrate  based on active chlorine used for hard water
working solution concentration 0.5-1.5%
c/ ATOS  D neutral liquid concentrate based on ammonium compounds working solution concentration 0.5-2%. Odourless, gentle for skin with good degreasing properties
2. Cleaning agents    
a/ COMP BIS N liquid concentrate, neutral, foaming with good degreasing properties, gentle for skin, working solution concentration 0.2%
b/ RENOTON acid gel for cleaning and polishing equipment and fittings, ready for use
3.  Hand disinfectants    
COMP  SEPTO disinfecting agent – ammonium compounds ready for use agent, no need to wipe hands – dries up within 20 sec.
REKORD hand washing and disinfecting agent ready for use agent